JHD DJI Mic 2 (2 TX + 1 RX + Charging Case) 1 TX + 1 RX Transmitter

Name: JHD DJI Mic 2 (2 TX + 1 RX + Charging Case) 1 TX + 1 RX Transmitter -
SKU: DJI Mic 2
Availability: InStock

Version	DJI Mic 2 (2 TX + 1 RX + Charging Case), DJI Mic 2 (1 TX + 1 RX), DJI Mic 2 Transmitter (Pearl White), DJI Mic 2 Transmitter (Shadow Black)

Specification

Specs

DJI Mic 2 Transmitter

Model
DMT02

Dimensions
46.06×30.96×21.83 mm (L×W×H)

Weight
28 g

Wireless Mode
GFSK 1 Mbps and 2 Mbps

Equivalent Isotropic Radiated Power (EIRP)
<20 dBm

Wireless Mode Operating Frequency
2.400-2.4835 GHz

Bluetooth Protocol
BR/EDR

Bluetooth Operating Frequency
2.400-2.4835 GHz

Bluetooth Transmitter Power (EIRP)
<20 dBm

Battery Type
Li-ion

Battery Capacity
360 mAh

Battery Energy
1.39 Wh

Battery Voltage
3.87 V

Charging Temperature
5° to 45° C (41° to 113° F)

Operating Temperature
-10° to 45° C (14° to 113° F)

Charging Time
70 mins

Operating Time
6 hours
^{Tested when both TXs are connected to the RX without recording backup clips internally, and the RX is connected to a camera via Camera Audio Cable (3.5mm TRS).}

DJI Mic 2 Receiver

Model
DMR02

Dimensions
54.20×28.36×22.49 mm (L×W×H)

Weight
28 g

Wireless Mode
GFSK 1 Mbps and 2Mbps

Equivalent Isotropic Radiated Power (EIRP)
<20 dBm

Operating Frequency
2.400-2.4835 GHz

Battery Type
Li-ion

Battery Capacity
360 mAh

Battery Energy
1.39 Wh

Battery Voltage
3.87 V

Charging Temperature
5° to 45° C (41° to 113° F)

Operating Temperature
-10° to 45° C (14° to 113° F)

Charging Time
70 mins

Operating Time
6 hours
^{Tested when both TXs are connected to the RX without recording backup clips internally, and the RX is connected to a camera via Camera Audio Cable (3.5mm TRS).}

DJI Mic 2 Charging Case

Model
DMC02

Dimensions
116×41.5×59.72 mm (L×W×H)

Weight
200 g

Battery Type
18650 Li-ion

Battery Capacity
3250 mAh

Battery Energy
11.7 Wh

Battery Voltage
3.6 V

Charging Specification
5 V, 1.5-3 A

Charging Temperature
5° to 40° C (41° to 104° F)

Operating Temperature
5° to 45° C (41° to 113° F)

Charging Time
2 hours and 40 mins

Charging Cycles for TX and RX
Approx. two cycles when charging two TXs and one RX at the same time

General

Polar Pattern
Omnidirectional

Frequency Response
Low Cut Off: 50 Hz – 20 kHz
Low Cut On: 100 Hz – 20 kHz

Max Sound Pressure Level (SPL)
120 dB SPL

Max Input Level (3.5 mm)
-6 dBV (THD < 0.1%)

Equivalent Noise
21 dBA

Monitor Interface Output Power
Max Output 12 mW@1 kHz, 32 Ω

Max Transmission Distance
250 m (FCC)
160 m (CE)
^{Measured in an unobstructed outdoor environment free of interference.}

DJI Mic 2

What can I use DJI Mic 2 with?

You can use DJI Mic 2 with a range of devices, including cameras, smartphones (via USB-C/Lightning port or direct Bluetooth connection), computers, Osmo Action 4 (via USB-C port or Bluetooth), Osmo Pocket 3 (via USB-C port or Bluetooth), and Osmo Mobile 6.

What are the differences between the different DJI Mic 2 combos? How should I choose?

DJI Mic 2 (2 TX + 1 RX + Charging Case) includes a charging case, one receiver, and two Shadow Black transmitters, suitable for two-person audio recording, and providing extended battery life.
DJI Mic 2 (1 TX + 1 RX) includes one receiver and one Shadow Black transmitter, suitable for single-person audio recording of individual creators.
The DJI Mic 2 Transmitter (Pearl White) and DJI Mic 2 Transmitter (Shadow Black) can be used with mobile phones, Osmo Action 4, and Osmo Pocket 3.

Do I need to activate DJI Mic 2?

No. DJI Mic 2 is ready to use without activation. You can scan the QR code on the package to register for a one-year warranty extension.

How do I update the firmware of the DJI Mic 2 transmitters and receiver?

1. Download the firmware update package from the Downloads page of DJI Mic 2;
2. Ensure that the receiver is powered off and the transmitter is on. Connect the transmitter or receiver to your computer using a standard USB-C cable;
3. Put the downloaded firmware update package (file with .bin suffix) under the root directories of the transmitters and receiver;
4. Disconnect from your computer, and the transmitters and receiver will start the firmware update automatically.
^{1. If the update fails, download and copy the firmware again and reboot the transmitters and receiver. Repeat until the firmware is updated successfully.}
^{2. Remove the mobile phone adapter from the receiver before connecting it to the computer for firmware update.}

How do I link DJI Mic 2’s transmitters with the receiver?

The transmitters and receiver are already linked by default. If you need to link them again, you can do so in the following ways:
Method 1: Put the transmitters and receiver into the charging case and they will link automatically;
Method 2: Power on the transmitters and the receiver, swipe down on the receiver’s main screen, select Receiver Settings, and swipe left to choose Link Device. Press and hold the linking button on one transmitter, and follow the on-screen instructions to complete linking. When the status indicator on the transmitter blinks green quickly, it indicates the linking is in progress. When the status indicator blinks green slowly, it indicates it has been linked and is waiting for another transmitter to be linked. When the status indicator turns solid green, the linking is completed.
To end linking during the process, tap Stop Linking.

How many recording modes does DJI Mic 2 provide?

DJI Mic 2 provides three recording modes: S (Stereo), M (Mono), and Ms (Mono Safety Track). S: Stereo mode. Audio from the two transmitters is recorded via separate channels.
M: Mono mode. Under Mono mode, the audio recorded by the two transmitters will be in one channel.
Ms: Mono with Safety Track mode. A backup soundtrack will be recorded at -6 dB in case the main track gets distorted due to a sudden increase in the audio volume of the source.
^{If you use Ms (Mono Safety Track) mode, you will need to separate the tracks during post-production.}

What functions does the DJI Mic 2 Charging Case provide?

The DJI Mic 2 Charging Case can be used for linking the transmitters with the receiver, as well as storing the transmitters, the receiver, and mobile phone adapters (USB-C and Lightning). It can also charge two transmitters and one receiver two times.

Are the DJI Mic 2’s USB-C and Lightning adapters interchangeable with the mobile phone adapters of DJI Mic and DJI Pocket 2?

No.

Are DJI Mic 2’s transmitters and receiver compatible with the transmitters and/or receiver of DJI Mic?

No.

What is the maximum transmission distance between DJI Mic 2’s transmitters and receiver?

250 m with FCC compliance and 160 m under CE (in an unobstructed environment without interference).

How long does it take to fully charge the transmitters and receiver using the DJI Mic 2 Charging Case? How long does it take to fully charge the charging case?

It is recommended to use a 5V/2A charger to charge DJI Mic 2’s transmitters, receiver, and charging case. At room temperature, it takes about 1 hour and 10 minutes to fully charge the transmitters and the receiver using the charging case. It takes about 2 hours and 40 minutes to fully charge the charging case.

What are the updates of DJI Mic 2 compared to DJI Mic?

You can refer to the comparison page for details.

DJI Mic 2 Clip Magnet

What is the magnetic force of the DJI Mic 2 Clip Magnet?

33 N.
^{DJI Mic 2 uses multi-pole magnetization and has enough strength to lift an iron block weighing up to 3.3 kg.}

Will the DJI Mic 2 Clip Magnet affect my bank cards?

It is recommended to keep the DJI Mic 2 Clip Magnet away from bank cards, pacemakers, RAM chips, and hard discs.

What should I be aware of when using the DJI Mic 2 Clip Magnet?

1. DO NOT use when wearing heavy clothes (sweaters, down jackets, etc.). The transmitters could fall off due to lack of magnetism.
2. Use with caution during vigorous exercise, for example, jumping, sprinting, etc.

DJI Mic 2 Transmitter

Where can I mount the DJI Mic 2 transmitter?

It is recommended to use the back clip of the DJI Mic 2 transmitter to secure it to places like your collar, or you can mount the transmitter using the DJI Mic 2 Clip Magnet.

How do DJI Mic 2 transmitters receive audio signals? Is the polar pattern directional or omnidirectional?

Omnidirectional.

How many operating modes do DJI Mic 2 transmitters support?

1. Transmitters connecting to the receiver via a 2.4G frequency band.
2. Bluetooth mode.

When the transmitter is connected to a mobile phone via Bluetooth, does it support audio recording for livestreaming? How do I connect the transmitter to a mobile phone via Bluetooth?

1. It depends on the compatibility of the livestreaming app and the mobile phone operating system. You can test it with Bluetooth earphones or headsets. If you cannot record audio with the earphones or headset for livestreaming, the transmitter does not support this function when connecting to a mobile phone via Bluetooth.

2. To connect, power on the transmitter, press and hold the record button for three seconds to switch the transmitter to Bluetooth connection mode, and enable Bluetooth on your mobile phone. Press and hold the linking button for two seconds and the mobile phone will automatically search for available Bluetooth devices. Select DJI Mic 2 when it appears to complete linking. Certain mobile phones will prompt a Bluetooth pairing request. Confirm the access to complete the linking. When the transmitter’s status indicator turns solid blue, the linking is completed. If the mobile phone’s Bluetooth cannot find DJI Mic 2, reboot Bluetooth on the mobile phone and link again.

What is the internal storage of the DJI Mic 2 transmitters? Do the transmitters support external SD cards for storage?

DJI Mic 2 transmitters each have 8GB of built-in storage that can record 24-bit audio for up to 14 hours or 32-bit audio for up to 11 hours. Transmitters do not support external storage.

What is the format of the audio files internally recorded by the DJI Mic 2 transmitter? How can I export audio files from a transmitter?

During internal recording, a file is saved every 30 minutes. When 32-bit float recording is enabled, a file is saved every 23 minutes, and the files are in WAV format. Recorded files can be exported by connecting the transmitter to a computer using the included USB cable.

How do I delete audio files from a DJI Mic 2 transmitter?

Connect the transmitter(s) to your computer and delete the files you wish to remove.
You can also format the transmitters using the receiver.
When the storage space of the DJI Mic 2 transmitters runs out, the recording will stop.

What devices can the DJI Mic 2 transmitter connect to via Bluetooth? How many transmitters can be connected at the same time?

The DJI Mic 2 transmitter currently only supports Bluetooth connection with Osmo Action 4, Osmo Pocket 3, and smartphones. Osmo Action 4 and smartphones can connect to one transmitter via Bluetooth at a time, while Osmo Pocket 3 can connect to two transmitters via Bluetooth at the same time.
When the DJI Mic 2 transmitter is connected to a smartphone via Bluetooth, intelligent noise cancelling and internal recording cannot be used.

DJI Mic 2 Receiver

How many transmitters can the DJI Mic 2 receiver link with?

It can link with up to two DJI Mic 2 transmitters at the same time.

Can the DJI Mic 2 receiver transmit audio data to devices with XLR input ports?

No.

How do I monitor audio during recording with DJI Mic 2? Can I adjust the monitoring volume during monitoring?

Link the DJI Mic 2 receiver and transmitters, plug a 3.5mm jack earphone/headset into the black 3.5mm monitoring port of the DJI Mic 2 receiver for monitoring. Monitoring volume can be adjusted during monitoring by swiping down on the main screen of the DJI Mic 2 receiver then entering Receiver Settings, swiping left, and tapping the monitoring volume icon to make adjustments.

Can I lock the screen of the DJI Mic 2 receiver? If so, how?

Yes. You can lock the receiver screen by pressing the power button once. The screen will prompt “Screen locked.” To unlock for touch control, press the power button again. When navigating in sub-menus, you can also return to the main interface by pressing the power button once.

When the DJI Mic 2 Receiver is connected to a mobile phone, can I play back recorded audio on the mobile phone?

You can play back recorded audio on a mobile phone without removing the receiver.

Can DJI Mic 2 charge both a mobile phone and the receiver simultaneously?

Yes. When the DJI Mic 2 receiver is connected to your phone via mobile phone adapter, you can use a charging cable to charge both the mobile phone and the receiver through the receiver’s USB-C port.

Is Stereo mode supported when DJI Mic 2 is connected with an iPhone using the Lightning phone adapter?

Yes.

Does the DJI Mic 2 receiver output digital or analog signals?

The DJI Mic 2 receiver’s OUT port outputs analog signals for camera connections.
The DJI Mic 2 Mobile Phone Adapter (USB-C and Lightning) and USB-C ports output digital signals.

What is DJI Mic 2’s function of auto power-on/off in sync with camera? How do I use it?

When the DJI Mic 2 receiver is connected to a camera via 3.5mm TRS cable, you can enable this function and the receiver automatically powers on and off in sync with the camera. When the camera is powered off or audio recording is not enabled during filming, the receiver will automatically power off. When the camera is powered on, the receiver will automatically power on.
To enable this feature, swipe down on the DJI Mic 2 receiver’s main screen, enter Receiver Settings, swipe left, tap Power On/Off with Camera Simultaneously, and select ON.

How do I use the camera gain recommendation feature?

Swipe down on the receiver’s main screen to find Receiver Settings, then swipe left to find Recommended Camera Settings. Select the brand and camera model, and adjust the camera gain to the recommended gain. For more details, refer to the Instructions on Recommended Gain for Camera Setup. Connect the receiver to the camera’s microphone port using a 3.5mm TRS cable, and the receiver’s screen will display the current camera model in the upper left corner. If your camera is not listed in the recommended settings, choose None for the camera brand and adjust the receiver’s gain based on audio monitoring.

DJI Mic 2 Accessories

What features does the DJI Lavalier Mic provide?

The unique rotating design allows for flexible recording, while its cable routing design prevents accidental unplugging. Compact and easily concealable, it is ideal for interviews, vlogs, livestreaming, and more.

Is the DJI Lavalier Mic compatible with DJI Mic?

Yes.

Reviews

There are no reviews yet.

Be the first to review “JHD DJI Mic 2 (2 TX + 1 RX + Charging Case) 1 TX + 1 RX Transmitter”